Affordable, portable, and open-source — this project demonstrates how to build a ham radio data transceiver and hotspot for around $60 USD, capable of sending APRS messages, Winlink email, and digital modes like FT8 without relying on cellular or Internet infrastructure.
By combining a Baofeng UV-5R with a Raspberry Pi Zero 2 Wireless running DigiPi software, you can create a low-power, self-contained communications device ideal for emergency preparedness, off-grid operation, or digital experimentation.
Hardware Components
🧩 Core Components
| Component | Description | Approx. Price |
| Baofeng UV-5R | Entry-level VHF/UHF handheld radio (HT) with 5W output. Affordable, versatile, and easy to modify for digital use. | ~$23 |
| Raspberry Pi Zero 2 Wireless | Compact Linux computer with Wi-Fi for digital interface and local web control. (Get the version with pre-soldered headers for display support.) | ~$18 |
| AIO (All-In-One) Interface Cable | Specialized USB-to-radio cable that connects via the Kenwood 2-pin interface. Provides RX/TX and PTT control between the Pi and the radio. | ~$20 |
| Optional: Small Display (e.g. 1.3" OLED) | Adds visual feedback for connection status, frequency, and packet activity. | ~$12 |
Total cost: roughly $60–65, depending on regional pricing.
🔧 Optional Supporting Hardware
External antenna: Improves range and reception significantly; the stock UV-5R antenna is often inadequate for digital operation.
USB Battery Bank: Powers the system for mobile use. A 10,000–20,000 mAh battery can sustain operation for several hours.
- Example: USB Battery (Amazon)
Ferrite Bead: Absolutely essential for noise suppression; pass the USB cable through twice to eliminate RF interference.
USB Adapter Cable: To connect power, data, and the ferrite bead cleanly between devices.
🧠 Software Setup
DigiPi SD Card Image
Download from digipi.org.
Flash the image to a microSD card using Raspberry Pi Imager or balenaEtcher.
Boot the Pi — it automatically creates a Wi-Fi hotspot accessible from your phone or laptop.
Visit the DigiPi Web Interface (usually
http://10.10.10.10) to access data mode controls.
Included Software Capabilities
| Mode | Description |
| APRS (Automatic Packet Reporting System) | Send GPS position, short messages, and telemetry via RF. |
| PAT (Winlink Email) | Enables sending/receiving email over HF/VHF radio using a simple browser-based interface. |
| WSJT-X / FT8 / JS8Call | Support for popular weak-signal digital modes. |
| SMS via RF | Send text messages to phones through gateways where available. |
| Packet Radio (AX.25) | Traditional digital packet mode for messaging and file transfer. |
The system runs entirely offline, meaning it can operate without Internet access, making it ideal for disaster communications or field expeditions.
⚡ Functional Overview
Connect the Baofeng UV-5R to the Raspberry Pi Zero 2W using the AIO interface cable.
Power both via a USB battery bank or 5V source.
Boot the Pi — it creates its own Wi-Fi hotspot for local access.
Use your phone or laptop to connect and open the DigiPi web control panel.
Choose your desired mode (APRS, PAT Email, FT8, etc.) and begin transmitting.
The result is a fully portable ham radio data station — compact enough to fit in a pocket, yet powerful enough to reach local repeaters or even global gateways under favorable propagation.
📡 Antenna & Signal Considerations
The Baofeng UV-5R’s included antenna is known for being inefficient.
Upgrading to a Nagoya NA-771 or Diamond SRJ77CA whip antenna greatly improves performance.
For base operation, use a mag-mount or dual-band dipole positioned outdoors or on a metal surface for better gain and clarity.
Also note: Baofeng units vary in spectral purity — some may emit spurious harmonics. When operating data modes, keep transmit power modest (1–2 W) to minimize distortion and interference.
🧩 Recommended Improvements
Replace the UV-5R with a Yaesu FT-65 or Alinco DJ-VX50 for cleaner transmission and better receiver sensitivity.
Use shielded cables and ferrite chokes to prevent cross-talk and USB noise.
Add a small OLED display to the Raspberry Pi for mode feedback.
Implement solar charging for full off-grid operation.
🌍 Real-World Use Cases
Emergency Communication: Send Winlink email when the Internet is down.
Field Expeditions: Log APRS data or weather telemetry from remote locations.
Amateur Radio Learning Tool: A practical experiment in digital radio fundamentals.
Off-Grid Messaging Node: Combine with Meshtastic or Nostr-based relays for hybrid P2P communications.
🔗 Reference Links
Raspberry Pi Zero 2W Availability: rpilocator.com
Baofeng UV-5R Radio: Amazon Link
USB Battery Bank: Amazon Link
Ferrite Bead: Amazon Link
USB Cable Adapter: Amazon Link
DigiPi Software: https://digipi.org
🏁 Consider
For around $60, you can construct a self-contained ham radio data hotspot capable of email, APRS, SMS, and digital messaging over RF — no Internet, no cell towers, and no dependency on external infrastructure.
This setup blends old-school amateur radio resilience with modern digital capability, proving that robust communication doesn’t require high budgets — only ingenuity, open-source tools, and the will to stay connected when everything else fails.
-Original Article Data Hotspot
Libretech Systems — Building resilient communication infrastructure for decentralized, off-grid, and educational applications.