Kyle Rankin on Nostr: I was having a problem with my "Silk" PLA jamming in the middle of many prints. It ...
I was having a problem with my "Silk" PLA jamming in the middle of many prints. It turns out this is a pretty common issue due to heat creeping up the extruder more than with matte PLA. The fix seems to be as simple as printing at a cooler temperature. In my case I also reduced retraction a bit.
#3dprinting
Published at
2024-02-01 23:15:44Event JSON
{
"id": "5f0bd238b8a67727622b4aa3679895275be761522887c41b0780d41e92446eaa",
"pubkey": "80587d28411159709b21896a70ef8583c7886c791d909d862754b5f27e231f8d",
"created_at": 1706825744,
"kind": 1,
"tags": [
[
"t",
"3dprinting"
],
[
"proxy",
"https://mastodon.kylerank.in/users/kyle/statuses/111858532010519735",
"activitypub"
]
],
"content": "I was having a problem with my \"Silk\" PLA jamming in the middle of many prints. It turns out this is a pretty common issue due to heat creeping up the extruder more than with matte PLA. The fix seems to be as simple as printing at a cooler temperature. In my case I also reduced retraction a bit.\n\n#3dprinting\n\nhttps://mastodon.kylerank.in/system/media_attachments/files/111/858/522/678/530/261/original/1379202481e1e94d.jpg",
"sig": "42a774701139103258fde9364ae612985afcca1e873799dd7be2cad37ac19bf368bde8a60ffc9ec5e1f8eca9b5f92cfeb5d0bea39725cfc8547e74b54773a4d3"
}
