Here’s the centering tips I remember from last week:
If you have trouble with clay drying out too much as you’re wedging, wet the surface slightly with a sponge and then wait for it to dry, then wedge.
Make a teardrop shape from your lump of clay and jam the point on the center of the wheel. It doesn’t have to be thrown. Whack it into the center and whack it down firmly in place.
Press down the edge of the lump all around, making a “ruffly skirt” sealed to the wheel. Wet a finger and press between the lump and the edge of the skirt, rotating the wheel to seal.
After this point, never touch clay unless wheel is in motion.
Wheel should turn in the direction dominant hand points.
No need to wedge elbows any particular place, but keep hands as still as possible on clay as wheel rotates to make it even more centered. Patience is key. “Let the wheel do the work.”
Coning is important, it forces air bubbles into the center so they go away as you open up.
Use a finger to make a groove at the bottom of the lump. Pinkies go here; alternate pulling the clay upward and pressing it together until you make a tall cone.
Point of cone goes in palm of dominant hand, whose fingers go down the side of the cone. Supporting hand palm touches clay and fingers support dominant hand fingers.
Dominant hand pulls cone down gently and wheel pulls the clay in to center. “Let the wheel do the work.” There’s a little subtlety of positioning to this I find it hard to describe verbally.
Now you can make things!
reltbracco / 𝔼𝕣𝕪𝕟 𝔹𝕣𝕒𝕔𝕔𝕠
npub1e2r…lx8t
2024-06-16 16:53:50
in reply to nevent1q…edyt
Author Public Key
npub1e2rd2k45ym2jmctnysfadxumrvrr57vqj69ck6trt2y62c40r0kqs9lx8tPublished at
2024-06-16 16:53:50Event JSON
{
"id": "c2ebb98fff589033d46930ba3bd880f8311a4a49bbbb20ba3e95004533a70907",
"pubkey": "ca86d55ab426d52de1732413d69b9b1b063a7980968b8b69635a89a562af1bec",
"created_at": 1718549630,
"kind": 1,
"tags": [
[
"e",
"40eeb6f4179d673eeb0bc1f99a99b503e8b43126f5a22acd02ef19b11c799b7c",
"wss://nostr.liberty.fans",
"root"
],
[
"e",
"6d8f3dfc9d821bbe7536565950f7e89d20cbdc7199f24fed36ae83a78d8b8ddc",
"",
"reply"
],
[
"p",
"bdbe1bdbc9b25a8d89d8fdaf0be1a0dcd837bac9691f597892903a5fdd86e27f"
]
],
"content": "Here’s the centering tips I remember from last week:\n\nIf you have trouble with clay drying out too much as you’re wedging, wet the surface slightly with a sponge and then wait for it to dry, then wedge. \n\nMake a teardrop shape from your lump of clay and jam the point on the center of the wheel. It doesn’t have to be thrown. Whack it into the center and whack it down firmly in place. \n\nPress down the edge of the lump all around, making a “ruffly skirt” sealed to the wheel. Wet a finger and press between the lump and the edge of the skirt, rotating the wheel to seal. \n\nAfter this point, never touch clay unless wheel is in motion. \nWheel should turn in the direction dominant hand points. \n\nNo need to wedge elbows any particular place, but keep hands as still as possible on clay as wheel rotates to make it even more centered. Patience is key. “Let the wheel do the work.”\n\nConing is important, it forces air bubbles into the center so they go away as you open up. \nUse a finger to make a groove at the bottom of the lump. Pinkies go here; alternate pulling the clay upward and pressing it together until you make a tall cone. \n\nPoint of cone goes in palm of dominant hand, whose fingers go down the side of the cone. Supporting hand palm touches clay and fingers support dominant hand fingers. \nDominant hand pulls cone down gently and wheel pulls the clay in to center. “Let the wheel do the work.” There’s a little subtlety of positioning to this I find it hard to describe verbally. \n\nNow you can make things!",
"sig": "fc1a4403d4c781944444b0d004477ee87e38b4dde326094146c2426618fd9ca36b2d3326ec70548c678bbffd086bbb62083975319631cc628b7cc97b3f17d5f9"
}